Valves Stockist and Valves Supplier in Dammam, Qatar, UAE, Kuwait, Oman, Bahrain, Jeddah, Netherland, Singapore, Africa, Nigeria, Angola, Egypt, Libya.

We are contributory in offering our reputed clients with superior quality Valves. We are involved in Valves Stockist and Valves Supplier in Valves Stockist and Valves Supplier in Dammam, Qatar, UAE, Kuwait, Oman, Bahrain, Jeddah, Netherland, Singapore, Africa, Nigeria, Angola, Egypt, Libya. The product is manufactured on basis of international standards and norms, with best quality raw material used in it. Valves Stockist and Supplier in Valves Stockist and Valves Supplier in Dammam, Qatar, UAE, Kuwait, Oman, Bahrain, Jeddah, Netherland, Singapore, Africa, Nigeria, Angola, Egypt, Libya. Various grades are available in the product such as 304, 304l, 316, 316l, 316ti, 317, 310, 321, 347, 904l, alloy 20, ALLOY A286 and SMO 254.

Valves Range in Stock

• Alloy Valve Range
• Duplex Valves
• Super Duplex Valves
• Alloy 20 Valves
• Monel Valves
• Inconel Valves
• Incoloy Valves
• Hastelloy Valves
• Titanium Valves
• 904L Valves
• 254 SMO Valves
• Zirconium Valves
• Uranus B6 & S1 Valves
• 6 Moly Valves
• Aluminum Bronze Valves
• AL-6XN Valves
• Nickel Valves
• Stainless Steel Valves
• API 600 trim chart

Alloy Valve Stockist supplies valves in exotic materials such as titanium, hastelloy, duplex, super duplex, monel, incoloy, inconel, alloy 20, 254 SMO, 6 Moly, AL6XN, tantalum, zirconium, uranus B6 and S1, 904L, nickel and aluminium bronze both in stock and can also deliver against tight lead times. Valves Stockist and Valves Supplier in Dammam, Qatar, UAE, Kuwait, Oman, Bahrain, Jeddah, Netherland, Singapore, Africa, Nigeria, Angola, Egypt, Libya, Algeria, Malaysia, Norway, Riyadh, Jubail, Saudi Arabia, Dubai, Russia, South Africa.

Nickel alloys are used extensively because of their corrosion resistance, high temperature strength and their special magnetic and thermal expansion properties.

The major alloy types that are used are:

• Iron-Nickel-Chromium alloys
• Stainless Steels
• Copper-Nickel alloys and Nickel-Copper alloys
• Nickel-Chromium and Nickel-Chromium-Iron alloys
• Low Expansion Alloys
• Magnetic Alloys

Stainless steels

The majority of the stainless steels contain 8-10% nickel. In all cases it is the combination of chromium with the nickel that does the job. Stainless steels are also useful as fire retardant materials since they retain their strength to higher temperatures than structural steel. Valves Stockist and Valves Supplier in Dammam, Qatar, UAE, Kuwait, Oman, Bahrain, Jeddah, Netherland, Singapore, Africa, Nigeria, Angola, Egypt, Libya, Algeria, Malaysia, Norway, Riyadh, Jubail, Saudi Arabia, Dubai.

The most common stainless steel is the 304 grade with 8% nickel and 18% chromium and the balance iron. This is used for such common items as spoons and forks, saucepans and kitchen sinks. Where extra corrosion resistance is required, such as for roofing in marine applications, type 316 is used. This has about the same amount of nickel and chromium as 304 but with 3% of molybdenum added. The balance is again iron. Valves Stockist and Valves Supplier in Dammam, Qatar, UAE, Kuwait, Oman, Bahrain, Jeddah, Netherland, Singapore, Africa, Nigeria, Angola, Egypt, Libya, Algeria, Malaysia, Norway, Riyadh, Jubail, Saudi Arabia, Dubai.

There are many other stainless steels to cover the wide spectrum of demands of engineers and architects.

Nickel Copper Alloys

These alloys are sometimes referred to as MONEL or NICORROS and contain nickel with copper and small amounts of iron and manganese. A typical alloy is the 400 grade (UNS N04400). This contains 63% nickel minimum, 28-34% copper, and a maximum of 2% manganese and 2.5% iron. There are also a small number of impurities kept at limited values to ensure the metal?s properties are not harmed.

These alloys are used where a higher strength is required compared to pure nickel. They have a wider range of environments where they resist corrosion but in some specialised applications, such as strong alkali contaminant, nickel would be superior. Valves Stockist and Valves Supplier in Dammam, Qatar, UAE, Kuwait, Oman, Bahrain, Jeddah, Netherland, Singapore, Africa, Nigeria, Angola, Egypt, Libya, Algeria, Malaysia, Norway, Riyadh, Jubail, Saudi Arabia, Dubai.

They find wide application in oil refining and marine applications where long corrosion-free life is required. Because of their good thermal conductivity they frequently are used for heat exchangers where sea water is one of the fluids concerned. Valves Stockist and Valves Supplier in Dammam, Qatar, UAE, Kuwait, Oman, Bahrain, Jeddah, Netherland, Singapore, Africa, Nigeria, Angola, Egypt, Libya, Algeria, Malaysia, Norway, Riyadh, Jubail, Saudi Arabia, Dubai.

Nickel Chromium Base Alloys

These alloys are used extensively in applications where heat resistance and/or corrosion resistance is required. In some members of the group, where conditions are less demanding, some nickel is replaced by iron to decrease the overall cost.

Metals fail at high temperatures by both oxidation (scaling) and through a loss in strength. Alloys in this class are designed to resist failure from both of these mechanisms. Nickel alloys are not suitable for high temperature sulphur rich environments. Valves Stockist and Valves Supplier in Dammam, Qatar, UAE, Kuwait, Oman, Bahrain, Jeddah, Netherland, Singapore, Africa, Nigeria, Angola, Egypt, Libya, Algeria, Malaysia, Norway, Riyadh, Jubail, Saudi Arabia, Dubai.

Where corrosion resistance is significant, molybdenum is used as an alloying addition.

This group of alloys are frequently sold under trade name specifications but most are listed in the Unified Numbering System. Common trade names are HASTELLOY, INCOLOY, INCONEL, NICROFER, and NIMONIC,

The more recent alloys in these groups also have a wide range of ancillary elements added to give special properties – some of these can be quite complicated and require very close control over composition and heat treatment.

All metals ?creep? under stress at high temperature and in their manufactured form, components may deform. This deformation could cause failure. Nickel alloys have higher strength and longer life at elevated temperature than most alloys. This makes them ideal for such parts as blades and disks in gas turbine engines. The designer however, must determine the expected life of each component and use the appropriate creep and rupture strength in the design, Valves Stockist and Valves Supplier in Dammam, Qatar, UAE, Kuwait, Oman, Bahrain, Jeddah, Netherland, Singapore, Africa, Nigeria, Angola, Egypt, Libya, Algeria, Malaysia, Norway, Riyadh, Jubail, Saudi Arabia, Dubai, Russia, South Africa.

Low Expansion Alloys

There are a group of nickel-iron ?controlled expansion? alloys where the expansion coefficient is low and constant over a range of temperatures.

These alloys are used extensively where changes in mechanical properties with temperature could be a problem, such as in precision springs. The alloys are also used where a metal/glass seal is required. Valves Stockist and Valves Supplier in Dammam, Qatar, UAE, Kuwait, Oman, Bahrain, Jeddah, Netherland, Singapore, Africa, Nigeria, Angola, Egypt, Libya, Algeria, Malaysia, Norway, Riyadh, Jubail, Saudi Arabia, Dubai.

One example is the alloy containing 48% nickel and the balance iron (UNS K94800). This alloy has the following expansion coefficients:

20-100°C: 8.5 x 10-6m/m.°C
20-400°C: 8.3-9.3 x 10-6m/m.°C

This alloy has an expansion co-efficient designed to match that of soda-lime and soft lead glasses and thus provides a sound glass/metal seal that will not crack because of differential expansion between the two materials.

Magnetic Alloys

There is a requirement for materials with high magnetic permeability to minimise the power requirements to generate a strong magnetic field, such as that required in tape recorder heads and for magnetic shielding around precision cathode ray display devices. Valves Stockist and Valves Supplier in Dammam, Qatar, UAE, Kuwait, Oman, Bahrain, Jeddah, Netherland, Singapore, Africa, Nigeria, Angola, Egypt, Libya, Algeria, Malaysia, Norway, Riyadh, Jubail, Dubai, Russia, South Africa, KSA, UK, USA, Jubail, Khobar.

These high permeability materials are complex alloys based on nickel with a range of composition possibilities. A typical composition could be: 70-80% nickel with small amounts of molybdenum and/or copper and the balance iron. This alloy would be expected to have a maximum relative permeability of between 50,000 and 100,000. Common trade names of this group are MU-METAL and PERMALLOY. Valves Stockist and Valves Supplier in Dammam, Qatar, UAE, Kuwait, Oman, Bahrain, Jeddah, Netherland, Singapore, Africa, Nigeria, Angola, Egypt, Libya, Algeria, Malaysia, Norway, Riyadh, Jubail, Saudi Arabia, Dubai.

There is also a requirement for materials with a constant permeability over a range of magnetic flux densities. This is required in telephone equipment and electrical fitters where a variation in permeability would result in distortion. These alloys are generally known as the PERMINVAR alloys and have compositions ranging around 45% nickel, 30% iron and 25% cobalt.

Valves for the most challenging industrial applications

Valves Stockist and Valves suppliers in Dammam, Qatar, UAE, Kuwait, Oman, Bahrain, Jeddah, Netherland, Singapore, Africa, Nigeria, Angola, Egypt, Libya, Algeria, Malaysia, Norway, Riyadh, Jubail, Saudi Arabia, Dubai, Russai, South Africa. We distributes and stocks high-alloy valves for a wide range of challenging corrosive industrial applications:

Valve Types Find the Right Valve Configuration Configurations Ball Valves Butterfly Valves Cast Valves Check Valves Control Valves Cryogenic Valves Foot Valves Forged Valves Gate Valves Globe Valves Needle Valves Plug Valves Safety Relief Valves Double Block and Isolation Valves Custom Made Valves Strainers.

Valves come in all shapes and forms. Find the right one here!